HT Instruments HT211 TRMS Digital Multimeter

Key Features At A Glance

• Measurement category CAT III 600V to ground, with double insulation and IP40 mechanical protection
• True-RMS (TRMS) conversion for AC voltage and AC current measurement
• 3 ¾ digit, 4000-point LCD with backlight, automatic polarity, and "OL" overrange indication
• Measures DC/AC voltage and current, resistance, continuity, diode, frequency, duty cycle, and capacitance
• Type K thermocouple temperature measurement from -20.0°C to 760.0°C
• Data HOLD and MAX/MIN functions with 2 samples/s sampling rate
• Powered by a single 9V battery (NEDA 1604 / IEC 6F22) with auto power off after 15 minutes idle
• Fused inputs: fast 10A/600V and fast 500mA/600V (5x20mm)

The HT211 from HT Instruments is a TRMS digital multimeter built around a 3 ¾ digit, 4000-point LCD with backlight. It uses true-RMS conversion and provides automatic polarity indication, an "OL" overrange indication, and a low-battery indicator, sampling at 2 times per second.

A digital multimeter is a general-purpose bench and field instrument for measuring electrical quantities such as voltage, current, and resistance. The HT211 covers DC and AC TRMS voltage, DC and AC TRMS current, resistance and continuity, diode test, frequency, duty cycle, capacitance, and temperature with a Type K probe, consolidating these functions in a single handheld unit.

ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois.

Product Core & Specifications

Important: Measurement category: CAT III 600V to ground.

Important: Temperature measurement requires a Type K probe; the stated temperature accuracy is that of the instrument only, without the probe.

Important: AC current accuracy is referred to a sinusoidal waveform. For not sinusoidal waveforms the accuracy is ±(10.0%rdg + 5dgt).

About this New unit

This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.