Keysight DSOX4034A 350 MHz 4-Channel Oscilloscope

Key Features At A Glance

• Bandwidth from 200 MHz to 1.5 GHz across the series; 2- or 4-channel models with field-upgradable bandwidth
• Greater than 1 million waveforms/sec update rate, powered by MegaZoom IV smart memory technology
• Industry's largest 12.1-inch capacitive touch display with hardware-based zone touch trigger
• Integrates up to 7 instruments in 1: scope, 16 digital channels, serial analyzer, WaveGen, DVM, counter, Bode plots
• Standard segmented memory, 36 automatic measurements, integrated DVM, and built-in frequency counter
• Standard USB 2.0 hi-speed, LAN (LXI), and VGA video out; GPIB-to-LAN interface available for automation
• Optional serial protocol decode and triggering via licensed software packages (one license per package)
• Optional dual-channel 20 MHz WaveGen function/arbitrary waveform generator (hardware upgrade)

The Keysight InfiniiVision 4000 X-Series is a family of digital storage (DSO) and mixed-signal (MSO) oscilloscopes engineered for next-generation debugging performance. Positioned as the "oscilloscope experience redefined," the series pairs fast waveform update rates that display the most signal detail with a large capacitive touch interface and a fully upgradable architecture that integrates the capabilities of seven instruments in one, protecting the investment as project requirements grow.

The series is built to capture the anomalies and elusive events that are toughest to debug, giving a high probability of catching random and infrequent events. With 16 integrated digital channels it addresses embedded designs that carry sophisticated digital control circuitry, providing up to 20 channels of time-correlated triggering, acquisition, and viewing. Application-specific capabilities extend coverage to power measurements on switching power supplies and power devices, USB 2.0 signal quality testing, HDTV video triggering and analysis, and frequency response analysis of passive filters, amplifier circuits, and the loop response of switch-mode power supplies.

ValueTronics stocks and holds its own inventory in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, so the instruments offered here are equipment we keep on hand. Since 1992, that combination of held inventory and hands-on verification has let engineers and labs buy test equipment with confidence.

Brand Heritage

Hewlett-Packard's test and measurement business was spun off as Agilent Technologies in 1999, and that instrument business was subsequently established as Keysight Technologies in 2014. The InfiniiVision oscilloscope line carries forward under the Keysight name today.

Compare Other Models in This Series

The InfiniiVision 4000 X-Series spans eight models that share a common architecture while differing in bandwidth and channel count. Every model offers the same 12.1-inch capacitive touch display, MegaZoom IV smart memory technology, standard segmented memory, and the fully upgradable 7-in-1 instrument integration, so the operating experience stays consistent across the line. The architecture is upgradable in the field, including bandwidth, allowing a unit to grow with project requirements.

Each model is available as a digital storage oscilloscope (DSOX) or, with the 16 integrated digital channels enabled, as a mixed-signal oscilloscope (MSOX). The digital channels can be activated at any time to convert a 2- or 4-channel DSO into an MSO, providing up to 20 channels of time-correlated acquisition.

Each model below links to its own dedicated product page with condition-matched pricing for the new configuration. Compare the bandwidth, channel count, and configuration options across the family, then select the specific model and condition that fit your application.

The models are organized into bandwidth tiers: 200 MHz (4022A/4024A), 350 MHz (4032A/4034A), 500 MHz (4052A/4054A), 1 GHz (4104A), and 1.5 GHz (4154A), with calculated rise times tightening from <= 1.75 ns at 200 MHz to <= 300 ps at 1.5 GHz. Within the 200, 350, and 500 MHz tiers both 2-channel and 4-channel configurations are available, while the 1 GHz and 1.5 GHz models are 4-channel; the 1 GHz and 1.5 GHz models also add equivalent-time sampling up to 128 GSa/s. See the comparison table for the per-model bandwidth, rise time, and channel details.

All models share the same 5 GSa/s half-channel sample rate, up to 4 Mpts of memory, and a greater-than-one-million-waveforms-per-second update rate, so the differences between models center on analog bandwidth and channel count rather than acquisition performance. USB 2.0 hi-speed signal trigger and decode is available on the 1 GHz and 1.5 GHz models, with USB 2.0 hi-speed signal quality testing supported on the 1.5 GHz models.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• N2894A 700 MHz passive probe (10:1 attenuation), one per channel
• Localized power cord
• Front panel cover
• Soft copy of Certificate of Calibration (CoC), 2-year calibration interval
• Localized front panel overlays, interface, and built-in help system

Product Core & Specifications

Important: Maximum input voltage (1 MOhm): 135 Vrms, 190 Vpk. Use this instrument only for measurements within its specified measurement category (not rated for CAT II, III, IV). No transient overvoltage allowed.

Important: USB 2.0 hi-speed signal trigger and decode are supported on ≥ 1.0 GHz models (4104A and 4154A) only; USB 2.0 hi-speed signal quality tests are supported on the 1.5 GHz model (4154A) only.

Important: The dual-channel WaveGen 20 MHz function/arbitrary waveform generator (DSOX4WAVEGEN2) is an option and is not included in the base oscilloscope.

Important: Mixed-signal (16 digital channel) operation requires an MSO model or the DSOXPERFMSO upgrade; the N2756A 16-digital-channel MSO cable is included on MSO models and delivered separately with the DSOXPERFMSO upgrade.

Recommended pairing: the DSOXBODE Bode plot training kit, a series R-L-C circuit board that attaches directly to the WaveGen output, supports frequency response (Bode plot) analysis with clearly labeled VIN and filter-output test points.

About this New unit

This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.