• Never worry about bedding in pads at the track again. Carbotech has a proven system to pre-bed in brake pads for a true bolt on and go brake change. For a small additional fee to your Carbotech brake purchase, get your pads Pre-Bedded to extend their life and improve performance. 
  

• What is “Pre-Bedding”? Contrary to popular belief, bedding is NOT the transfer of material to the rotors. That’s material transfer. Bedding is actually the process of burning off some of the chemicals in the pad material itself. When you bed pads at the track, you need to get them up to temperature high enough to start burning off those chemicals – while simultaneously transferring the material to the rotor. Having the pads pre-bedded burns off those chemicals in advance and allows quicker material transfer to the rotor, extends the life of the pad and sets the pads up to be immediately at full braking potential.

  Pre-Bedding is performed directly by Carbotech Performance Brakes in their manufacturing facility.

Carbotech brakes give you:

• Assured stopping power
• Increased overall performance and handling
• Excellent modulation and release characteristics
• Better control entering the corners
• Longer brake pad and rotor life—up to four times longer than the competition!
• Longer rotor life
• Non-corrosive dust

Carbotech™ AX6™

The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise.