Digi-Pas DWL 200 is a torpedo Digital level gauge which displays any angle around 360°. Precise, speedy & reliable measurements. Also has an audible sound to indicate alignment at  0° & 90° angles. Length is 200mm/8". 

• Wide Angle Measurement Range up to 360° (4x90°)
  
• High Resolution of 0.1° (1.75mm/M) gives little room for error
  
• Patented Clip On Design makes leveling on all sides easy.
  
• Alternate Zero feature gives good plane reference
  
• Switchable Display in °(Degree) & %(slope)
• Buzzer sound when 0° or 90° is reached
  
• Auto-off after 3 Minutes to save battery
  

Resolution of 0.1° (Accuracy : 1.75mm/M)

Increase Productivity

Using a digital level saves time. Degree or slope can be automatically read from the display without the need for calculation. A flat magnetic base for hands free operation on metal surfaces is also included.

Specifications

• Measuring range from 0° ~ 90°; 4 x 90° (360°)
• Resolution of 0.1° (1.75mm/M)
• Accuracy of ± 0.1° at around 0° & 90° ; ± 0.2° at 1°~89°
• Adjustable Clip-on design (patented)
• Alternate zero feature
• Digital display of angle in °(Degree) & %(slope)
• Buzzer sound
• 3 Minutes auto off

Application Examples

Digi-Pas^® DWL-200 torpedo model is small in size, light weight, with magnet, precise, with buzzer sound. It is increasingly unnecessary to have a long level all the time to get the angle or slope on-site.

Digi-Pas^® DWL-200 torpedo model is a relatively longer than cube level. It gives a better seating on a flat surface in metal workshops, woodworking, plumber piping installations, guttering etc.

Digi-Pas^® DWL-200 torpedo model is used for getting accurate readings on window frames installation.

Digi-Pas^® DIY satellite dish aligning has become speedy and effortlessly with Digi-Pas^® DWL-200 digital levels. It is used to ensure the mast/pole for the receiver is levelled and the dish is at targeted elevation to optimise satellite signal.

Digi-Pas^® Door frames installation and inspection has becoming easy by using Digi-Pas^® DWL-200 to check frame is square, ensure frame is level with wall and door frame corners are maintained at right angle. Good door frames installation is essential for door to be closed properly.

Digi-Pas^® Solar modules installation and periodical inspection fully utilized the Digi-Pas^® DWL-200 in getting accurate tilt angle. Wide measuring angle feature of Digi-Pas^® digital level enable solar modules to be perfectly tilted to the direction that maximise light exposure.