Rust-Oleum EpoxyShield Ultra – Quick-Drying Water-Based Floor Coating

Rust-Oleum EpoxyShield Ultra is a single-pack, water-based epoxy-modified acrylic floor coating designed for light to medium-duty areas. With a satin matt finish, it delivers durable protection against foot traffic, limited vehicular use, and common chemicals including diesel, motor oil, coolant, and household cleaners.

Touch dry in just 2 hours, this easy-to-apply coating is ideal for garages, workshops, utility rooms, and other areas requiring a resilient, low-maintenance floor finish.

Key Features:

• For Light to Medium Traffic – Perfect for garages, workshops, and utility spaces
• Easy to Apply – User-friendly single-pack formula
• Quick Drying – Touch dry in only 2 hours
• Satin Matt Finish – Durable, attractive surface
• Chemical & Tyre Resistant – Withstands diesel, motor oil, coolant, household chemicals, and most types of tyre

Surface Preparation

Remove oil, grease and all other contaminants with EpoxyShield Cleaner/Degreaser 2901 in combination with high pressure cleaning. Allow new concrete to set for at least 30 days before applying a coating. Remove laitance, loose and damaged concrete by sandblasting or etching with RUSTOLEUM Surfa-Etch 108. Repair all holes and cracks with EpoxyShield® concrete repair products. Always pre-treat absorbent, porous surfaces with EpoxyShield® Sealer 5220. Roughen or blast well-sealed and smooth concrete and treat with Epoxyshield® Sealer 5220 or apply a coat RUST-OLEUM 3333 Super Adhesive. Roughen still-intact floor coatings to ensure good adherence. Remove poorly adhering old coatings with wire brush and sandpaper. During application the surface must be clean and dry.

Technical Data

Density (g/cm³): 1,16 - 1,21
Gloss Level: Satin
Solids Content in weight: 48-52%
Solids content in volume: 38% - 42%

Directions for Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use

Data Sheets

Rust-Oleum Epoxy Shield Ultra TDS

Rust-Oleum Epoxy Shield Ultra MSDS