Motorcycle Gear Indicator for Ducati 1098 2007-2009 Monster 1100 / EVO All Years No need to fix the location: the motorcycle gear indicator shows the current gear number and the display can be mounted anywhere. Convenience: The motorcycle has a spare socket, just plug it in and you're ready to connect. No need to cut wires. The shift indicator display can be mounted anywhere. Instalación: Medidor de velocidad de la pantalla de la motocicleta el proceso de instalación es simple, práctico y fácil de usar. Con perfecta adaptabilidad, sólo tiene que sustituir y montar. Maquina antes de comprar.

Bienvenido a nuestra tienda y le deseamos una agradable experiencia de compra.somos fabricantes profesionales de piezas de motocicletas.Para cualquier pregunta o inquietud, no dude en ponerse en contacto con nuestro equipo de servicio al cliente. Features: Color: Black Light Color: Red/Blue/Green 1-6 Gear Display Fitment: Ducati Superbike 1098 2007 2008 2009 Ducati Monster 1100 ABS/NON ABS All Years Ducati Monster 1100 EVO All Years Ducati Monster Diesel 2012 2013 Installation: Locate the black 4-pole diagnostic connector (also known as DDA) under the seat. -Remove the cover (cap) from the plug and connect the Geefy's hip plug. - Connect the red wire of the Geoffy's Hip Meter to the blue 15 above the fuse. - Route the cables along the frame to the mounting location. - Peel off the green plastic from the back of the unit and attach the display. - Secure the cables with the provided cable ties. Configuration: You need to setup the module after installation. When the ignition is turned on, the display will count backwards (from 6 to 1) to indicate that the memory has been cleared. - Use the stand to raise the rear wheel off the ground and start the engine in neutral. (If you don't have a stand, you can set up the unit while driving. Find a long, straight road with little traffic.) - The display will flash "1". Select 1st gear, release the clutch, and maintain RPM above idle speed. The display will flash faster while the unit is learning the gears. - Select 2nd speed when "2" appears on the display. Repeat this process until all gears (5 or 6) have been considered. The unit is programmed and must indicate gear correctly. Now, when the ignition is turned on, the display will count forward (1 to 6) to indicate full functionality. Package Contents: 1 x Gear Indicator (with installation instructions)


Manufacturer: ‎MUTYNE
Part number: ‎MUTYNE
Item weight: ‎150 g
Packing size: ‎3 x 2 x 1 cm; 150 g
Size: ‎One Size
br>Color: ‎Green Light
Quantity: ‎1