This Wheeler FAT torque wrench will tighten every screw with a predetermined torque,  significantly reducing issues that can stem from under or overtightening.

It has an has an easy-to-read side display and torque is adjusted via the knob on the bottom of the wrench.

Torque can be adjusted from 10 to 65 inch/pounds (1.13 Nm to 7.34 Nm).

Both the screwdriver and the torque wrench have rubberised grip and a steel, magnetised shaft on the front end.

Both the shaft and the bits are made of S2 tool steel that has a black phosphate coating for improved corrosion-resistance and prolonged usage.

This set contains:

• 1 x Regular Screwdriver
• 1 x Torque Wrench
• Flat blade bit: #1-#6, #8, #13-#16, #18-#21, #27-#30, #32-#35, #36, #39, #41, #45, #47
• Sae Hex bit (inch): .05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, ¼, 5/16, 3/8
• Metric Hex bit (mm): 1.5, 2, 2.5, 3, 3.5, 4, 5, 5.5, 6, 7, 8, 9, 10
• Torx bit: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T35, T40
• Phillips bit: PH0, PH1, PH2, PH3, PH2 (long)
• Square bit: 1, 2, 3
• Pin bit (inch): 0.062, 0.093, 0.118, 0.125
• Metric nut driver (mm): 5, 5.5, 6, 7, 8, 10, 12
• Sae nut driver (inch): 3/16, ¼, 9/32, 5/16, 11/32, 3/8, 7/16, ½
• Leupold/Buehler, Hex adapter ¼ drive
• Case

Please note : This is a Special Order item and will be shipped within 10 working days of ordering