Rust-Oleum 9100 High Performance Epoxy – Heavy-Duty 2K Epoxy Coating

Rust-Oleum 9100 High Performance Epoxy is a two-pack, high-build glossy epoxy coating that provides superior protection against corrosion, abrasion, and chemicals. At 125 microns dry film thickness, it is twice as thick as regular epoxies, ensuring long-lasting durability in demanding environments.

Formulated with a high concentration of rust inhibitors, it delivers excellent adhesion and resilience on both metal and concrete floors. Available in almost any tintable colour, this epoxy is ideal for industrial facilities, warehouses, workshops, and heavy-duty flooring where maximum performance is required.

Key Features:

• High Build (125 Microns Dry) – Twice as thick as standard epoxies
• Excellent Chemical & Abrasion Resistance – Protects against harsh conditions
• Corrosion Protection – Rust inhibitors for long-term durability
• Versatile Application – Suitable for metal and concrete floors
• Tintable in Almost Any Colour – Wide customisation options
• Durable Gloss Finish – Long-lasting, professional appearance

Application Details:

• Type: Two-pack epoxy coating
• Surfaces: Metal and concrete floors
• Finish: Gloss, tintable to almost any colour
• Layer Thickness: 125 microns dry (high-build)

Surface Preparation

Remove all dirt and contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergent like Rust-Oleum ND14. Sand previous glossy coatings to roughen the surface slightly, check compatibility. The surface must be clean and dry.

Steel: Remove loose rust, mill scale and deteriorated coatings by hand or power tool
cleaning to St 2/3 (ISO 8501-01 : 1988). Blast large areas to Sa 2 (ISO 8501-01: 1988),
blast profile max. 50 µm. For immersion purposes, prepare to Sa 3 (ISO 8501-01 : 1988),
blast profile max. 75 µm.

Concrete and masonry: New concrete or masonry should cure for at least 30 days before
applying the coating system. Remove laitance, any loose or unsound concrete or coatings.
Smooth concrete should be abraded except in case of use of a Rust-Oleum adhesion
primer.

Technical Data

Density (g/cm³): 1,32
Gloss Level: Gloss
Corrosion Class: C4 high protection
Solids content in volume: 89,3 %
Heat Resistance: Immersion or wet heat: 50°C - Dry Heat: 100°C
Mixing Ratio: Vol: 2:1

Directions for Use

Stir individual components thoroughly before mixing them together, with a mechanical low speed mixer for 3 minutes.

Data Sheets

Rust-Oleum 9100 Solvent Based Epoxy TDS

Rust-Oleum 9100 Solvent Based Epoxy Base MSDS

Rust-Oleum 9100 Solvent Based Epoxy Activator MSDS